What I'm trying to do is set TGs on the following parameters:
2) translating along x and y
However, I'd like to do this in such a way that I don't get symmetrical edge reflection. In other words, I'd like to zoom into an image and then rotate and translate it. I haven't figured out a way to do this yet (the lack of reflecting edge).
The problem seems to be when I try to do the translation. Conceptually, it seems like if I've zoomed in far enough, I should be able to translate (within certain bounds) without getting to an edge. Is there another way to do translation in MSG besides 3ReflectTrans (which automatically adds the reflecting edges)? Or another way to get this overall effect?
In version 4 you can choose different options for what happens at the edges, so you could choose a modulo repeat as opposed to reflection. I think everything in the current versions reflects with interactive warp and msg processors. You could go back to using the timeline warp in studio artist to build your scaling, translation, and rotation based on the movement of the bezier curves. There's no reflection at boundaries associated with that particular kind of warp.
I think the issue is not even so much what happens at the boundaries (actually, most of the time I'm very happy to have the reflection), but it's more with how these particular MSG modules get chained together. For example, when the output of the scaling operation gets sent to be translated, the frame (i.e., the outer boundaries of the image) that the translation is working with is not the original frame (the frame of the source image), but rather, the new frame established by the scaling operation. In other words, what I'm trying to do is zoom in to an image and then move around. But, ideally, because I've zoomed in far enough, and because I don't move around very far (after having zoomed in), I don't get to the edges of the original image. Therefore, it's not really that I don't want the reflection, but more that I don't want the sense of coming to an edge at all.
It's a little hard to explain--I don't know if the above was clear. If it was, is this zooming and edgeless translating something that's possible within MSG as it exists currently, or is this exclusively a job for timeline warping?
If you compare the two images, you can see that we've now zoomed in to the upper left corner. So far, no reflecting edges, or "new edges" of any kind. This is what I'd like to keep. If the 2nd image is a new, zoomed in "window" on the first, I'd simply like to explore the original image by moving the "zoomed in window" around. For instance, we've currently zoomed in on the upper left corner. Imagine slowly moving the zoomed in window across the top of the source image, so that we ultimately wind up zoomed in to the upper right corner of the source image. Does this make sense so far?
I think this is happening because the translation happens in relation to the scaled image, not in relation to the original source image. Because the scaled image "replaces" the source image, translating immediately creates edges. What I'm looking to do is perform a series of operation on the source image, without each operation becoming the new source image. So, I'd like to not only be able to create a zoomed in window on the source image, but I'd also like to be able create a "zoomed in and rotated" window, etc, all the while without creating visible edges. I'd like to be able to have the source image as a buffer somewhere, and perform a bunch of operations in relation to it, rather than having each successive operation happen in relation to the last one that happened.
Please let me know if this is any clearer. If not, I'll try again.
OK, i think i understand. If you're using a msg processor that does some kind of a warp, like the scale rotation, you should have the ability to translate as a part of that processor. So for the 3crotatescale3 processor, you could use the last horz and vert center controls to translate it. i'd lock the controls for the 1st 2 rotate scale adjustments to do nothing.
if you are using interactive warp in studio artist, then there is really no way to add the translate as a part of the scale operation, and you are right as soon as you do the translae as a separate operation you get the edge reflection since that whole operation is really designed to do that for artistic effects.
"If you have very specific requirements for how you want the image folder brushes to be laid own in the canvas, and if the RGB Match brush indexing doesn't do the job you want, you could build selection masks and run multiple passes with the…"
"So i'm confused about what you are trying to do. The RGB Mapping frame modulator in Brush Source is going to choose the image that gives the least RGB error when matched to the source color where it is being placed down. You have it…"
"Well, if you look in the Brush Modulation control panel, you will see that you are using the source Image Orientation to modulate both the size and the orientation of the brush nibs.
So if you set the Size Modulation to None, then there will be no…"
Image sequence built with individual images pulled from the Variation 18 video posted on Facebook, the images are being used based on the viewers' reaction.
More info here: https://vimeo.com/showcase/5641128
At first, the 32 videos will be posted…