Export a part of a PAseq as a (paint synthesizer classic) paint preset?

HI! there are a some steps of some PASeq that I really like, is there a way I can export a specific step of a PASeq as a (paint synthesizer classic) paint preset instead of a PASeq? I have tried to export a step and the only option I have is to export as a PASeq.

Thanks!

Views: 40

Reply to This

Replies to This Discussion

If you run the action step, then the Editor for the op mode associated with the action step is set to the parameters in the action step. So if the action step is a paint action step, then you can just export a paint preset from the paint synth editor after running the paseq action step.

Thank you, but I am still not understanding how to do this. I would like to get my watershed effect out of a PASeq so I have more control over it, basically turning that effect into a paint preset so I have control over where it starts, etc. Is this possible?
I really like the effect of this watershed, (see screenshot) however, I am having so many issues when I try to rescale, and I need large format-at least 30 inches at 300 dpi. I have tried so many different things to get this to work. My art is printed on very large canvases.When I try to rescale this effect, I get very black areas, and little "spaces", almost like dots, on flat areas where the effect doesnt know how to fill in the area.

And, I would like to have more control over where and how "dense" the effect is, for instance, the background less effect and some areas more effect.

If you run a single action step, then the editable controls of the operation mode associated with that action step are set to the values saved in the action step. You can then just press the action button in that operation mode to run the effect in that action mode (as opposed to running it by playing the paseq).

So, you have a paint action step. If you run it, then the process of running it sets the paint synthesizer up for that particular paint effect. So if you switch to paint synth operation mode and press action, then the paint effect will run. You can then use file : export : export paint preset to save the paint effect as a paint preset.

You can also change any of the controls in the paint synth Editor to adjust the effect. You can save these edited changes as a different paint preset if you want.

As to adjusting the paint effect. You can work with the brush size and spacing to increase the brush coverage and move individual paint nibs closer together to help get more density.

You can also change the region pattern spacing of the path shape being used to fill the path start regions (Path Shape control panel).

You could modulate the brush size if you want different density or coverage in different areas.

Or you could mask the canvas and run the paint effect twice. So entire canvas with loose effect. Then increased density on selected regions.

Thank you! Your directions worked perfectly for exporting this into a paint preset.

Is there a way I can set up a region watershed so I have manual control over where it lays (like assisted painting?) So I would be able to just paint the areas that I would want this effect instead of masking?

RSS

Latest Activity

upcong updated their profile
49 minutes ago
Yao Kuame posted a discussion

Color vectors

In one of your comments you said studio Artist RGB mapping uses only one vector and wanted to know if 2D modulation or Wacom tablet can be use to introduce another color vector mapping in order to have more than one vector.How can one incorporate more than one color into a paint job.Thanks. Really learning something.See More
15 hours ago
Synthetik Software left a comment for Yao Kuame
"Yao, maybe you should start a new forum discussion about your question. It's hard to answer it deep inside of that other discussion thread, and i'm not really sure what you are talking about when you refer to using 2D modulation or a wacom…"
16 hours ago
Yao Kuame replied to Synthetik Software's discussion How to emulate the old MSG Evolver ArtMapper in SA V5. in the group MSG
"Hi, please is it possible to use 2D modulation or Wacom tablet to have more than 1 color."
16 hours ago
Synthetik Software replied to Synthetik Software's discussion How to emulate the old MSG Evolver ArtMapper in SA V5. in the group MSG
"You asked for an explanation of color vectors. Each color vector would be an RGB color. What we are talking about when referring to color vectors in the context of generating image mosaics is the number of color vectors used to best match an image…"
17 hours ago
Yao Kuame replied to Synthetik Software's discussion How to emulate the old MSG Evolver ArtMapper in SA V5. in the group MSG
"Hello everyone, Please what's the meaning of color vectors or 1 color vector and how does it work. Want to really learn from this forum. Would be grateful if someone could explain. Thanks"
18 hours ago
upcong posted photos
Thursday
David Buckle posted photos
Thursday

© 2019   Created by Synthetik Software.   Powered by

Badges  |  Report an Issue  |  Terms of Service