Hello,

 

So I'm having a strange problem where I

 

1) process a movie to a folder of images: folder X.

 

2) then, I process (with a different PASeq) the images of folder X to a new folder of images , folder Y.

 

Here's the problem: processing the movie to folder X resulted in a series of frames: f1, f2, f3, etc. However, processing the images from folder X to a new set of images in folder Y results in frames with the following order: f1, f2, then skips to f10-20, then to f100, etc. In other words, the frames aren't being written from 1 to n, but in the order I described.

 

Any advice would be greatly appreciated.

 

Thanks, Michael

Views: 140

Reply to This

Replies to This Discussion

Just tried it with another set of images, and got a resulting frame order of

f1, f10-f19, f100, etc

Are you on a mac or windows? And what os version?

 

Maybe we need to move to an explicit preference based numbering scheme of something like name0001,name0002, etc for our numbered output. I don't have any real control over the results of a folder scan, it gets passed back to me in what it thinks is alphabetical order. And different operating systems can interpret name numbering differently, even between different version of an os on the same computer platform, let alone different computer platform.

 

I actually thought we had dealt with this before at some point.  What Action menu commands are you using for your processing? I can look under the hood at how it's currently implemented try and get a fix in the next 4.04 beta.

I'm on a mac, OS 10.5.8.

 

This happens when I write an image sequence using the "Process with Paint Action Sequence->image to image," (actually this happens with "movie to image" as well), and then read those images in to create another sequence. In other words, this happens when the image sequence that I'm reading in was created by SA. I'm pretty sure, but not 100% positive that this does not happen when I try to read in an image sequence that was written by QT Pro (I can try to verify this).

 

The problem, at least on this computer/system, seems to be in the way that SA writes out the image sequence. When I have SA write the image sequence, and then read it back in with either SA or Photoshop, it gets read in the wrong order. When I use Quicktime to write out the image sequence, it gets read in properly by both SA and PS.

PS uses "<nameoffile> 0001" , which seems to work...

I'll fix it in 4.04, and try to include the fix in the next beta build i promised you. I really thought we dealt with this whole issue in the past a long time ago, but maybe as a part of the version 4 rewrite or some other 'fix' the extra proceeding 000x part of the name generation got changed.

thanks so much, again no hurry, but just wanted to see if there was some fix in the preferences or something that I didn't know about.

 

I can confirm that on my system, image sequences written by SA are named file1, file2, etc., with no 000x thing...

 

i had the same problem a couple of days ago.

So i'm currently fixing this issue. I had a few questions for anyone who cares about this particular frame numbering issue.

 

Is it ok to just have a fixed number of digits for the numbering, and if so what should that be? Or do people feel a need to specify it as a preference option.

 

Also, any other special requests for frame naming or numbering features, while i'm reworking this code?

The way Photoshop does it seems to work with all my other apps: "filename 000x" (there is a space). Thanks for looking at this!
I mentioned this once before, but will repeat it here. I would find it infinitely more useful if the numbering of movie files followed the frame number vs the image processed number. Right now if I am processing a movie to a list of images the image numbering is such that the first frame processed is image 001.. now if it happens that I am starting at the first frame and don't stop or crash this is fine. But if I am starting at frame 500 or if the process is stopped and I have to re-start then the numbering from 001 (all over again) can create massive confusion. I have a kludged workaround. But it would be great if the numbering followed the frame sequence such that if I start or restart from frame 500 the numbering would start at 500.
makes a lot of sense

The frame numbering of the source movie file used with a movie stream and running animate? 

Or shift clicking animate to continue at the current keyframe?

Or some other scenario i'm not thinking about?

 

Then there are the problem cases that have to be considered. I run movie streams where i have a 10 frame source movie file that loops. If the movie loop play and movie loop action advance source settings flags are turned on it will do that. Or what if i have those flags turned off, start at source frame 50, and then manually advance the source during processing at arbitrary points.

 

Would a manual offset preference for the output numbering be a better solution?

RSS

Latest Activity

Paul Perlow posted a photo
11 hours ago
Synthetik Software replied to Adrion T. Kelley's discussion Matching colors from Source Image to .png's from Mosaic Image Folder
"If you have very specific requirements for how you want the image folder brushes to be laid own in the canvas, and if the RGB Match brush indexing doesn't do the job you want, you could build selection masks and run multiple passes with the…"
12 hours ago
Synthetik Software replied to Adrion T. Kelley's discussion Matching colors from Source Image to .png's from Mosaic Image Folder
"So i'm confused about what you are trying to do.  The RGB Mapping frame modulator in Brush Source is going to choose the image that gives the least RGB error when matched to the source color where it is being placed down.  You have it…"
yesterday
Synthetik Software replied to Adrion T. Kelley's discussion Matching colors from Source Image to .png's from Mosaic Image Folder
"Well, if you look in the Brush Modulation control panel, you will see that you are using the source Image Orientation to modulate both the size and the orientation of the brush nibs. So if you set the Size Modulation to None, then there will be no…"
yesterday
David Buckle posted photos
yesterday
Jean Detheux posted a video

Variation 19 FB image sequence from Jean Detheux on Vimeo.

Variation 19 FB image sequence

Image sequence built with individual images pulled from the Variation 18 video posted on Facebook, the images are being used based on the viewers' reaction. More info here: https://vimeo.com/showcase/5641128 At first, the 32 videos will be posted…
yesterday
Jean Detheux posted a video

21. Var 20 from Jean Detheux on Vimeo.

21. Var 20

21 Variation 20 This is the 21st part of the Goldberg Variations, a music - images dialogue in 32 movements between Elisabetta Guglielmin (harpsichord) and Jean Detheux (images). At first, the 32 videos will be posted on Vimeo, one at a time (Aria…
Sunday
Adrion T. Kelley posted a discussion

Matching colors from Source Image to .png's from Mosaic Image Folder

Attached are:Exported Image = GirlWithClasses_Soda.jpgPaint Synthesizer Preset = Alpha_PNG_TSP_Untouched_Orient_Modulation_6Mosaic Image Folder = Stuff.zipI want to replace certain colors from my GirlWithGlasses.jpg source image with certain .png's from my Mosaic Image Folder:Source Image skin color = Yellow Fanta soda canSource Image hair color = Orange Fanta soda canSource Image clothing color = Purple Fanta soda canSource Image glasses and pupils = = Black Coke soda canSource Image lips =…See More
Sunday

© 2020   Created by Synthetik Software.   Powered by

Badges  |  Report an Issue  |  Terms of Service