In a few months there will be a new possibility to use SA on an iPad Pro, perhaps like Cintiq does.....Here. Only the canvas, and using apple pen. Control menus on the Mac.

Views: 147

Reply to This

Replies to This Discussion

Thanks, Bernard...From what I read you do not need an iPad Pro...it works with any iPad. It won't be available until January. It is a less expensive way to avoid buying a Wacom Tablet. It also comes with a drawing software.

Yes Paul, it works also with a simply iPad, but you can only use apple pen on a pro model. 

Hi Bernard,

There is already an app for that, it’s called Duet Display. It’s cheaper than Luna display but it requires a lightning cable to connect the iPad and the Mac. I have it but almost never use it, it seems to work OK though. 

Hi Florence, OK thanks. 

That'll be fun-- I have the iPad Pro, and apart from the frustrations of losing the Pencil, its a lot of fun.

RSS

Latest Activity

Alan posted photos
10 hours ago
David Buckle posted photos
Thursday
Victor Ingrassia posted a video

GH-1_SpokeElipseBloom1

experimenting with Image Operation: SKETCH MASS
Thursday
Synthetik Software replied to Synthetik Software's discussion How to emulate the old MSG Evolver ArtMapper in SA V5. in the group MSG
"Someone asked about the Source option in the Paint Brush Load control panel. The were referring to MSG brush load, but the image processing and lighting effect brush loads also have source options.  The Source refers to what is used as input…"
Wednesday
David Buckle posted a photo
Tuesday
Synthetik Software replied to ASARE CHRISTIAN's discussion REGION FILL AS BRUSH
"As far as the paint preset you are trying to use this in. So, the paint preset is using a msg preset for the msg brush load that is generative only. By that i means it’s io chain is setup so that no input to the msg preset is used in it.…"
May 19
Synthetik Software replied to ASARE CHRISTIAN's discussion REGION FILL AS BRUSH
"Source is an option in all of the Brush Load control panel types. It refers to what signal is used as the source into the associated brush load control panel processing. So for the msg brush load type, it's what source is used for input into…"
May 19
ASARE CHRISTIAN replied to ASARE CHRISTIAN's discussion REGION FILL AS BRUSH
"Hi John, Please could you explain what the source parameter under the MSG brush load option does."
May 19

© 2019   Created by Synthetik Software.   Powered by

Badges  |  Report an Issue  |  Terms of Service