Hello everyone,

I'm back with SA 5.0...with so many question also :)
I just tried to make a mosaic with Basic Image Tile Preset. But when I tried to touch up the setting, nothing happen, Except when I change the source of folder image. 
And when I see the result, the tile become rectangle; not square. How can I change it ?


(You can see on my attached picture)

Views: 154

Reply to This

Replies to This Discussion

If you are saying that you edit a preset, and then you change to a different preset and then go back to the one you edited and the edits aren't there, that would be true unless you save the edited changes you make.

You can of course use the appropriate file : export menu command to save an edited preset. 

A quick way to save edited changes to a preset if you don't want to change the name of the preset is to option click the main preset browser icon (option is alt key on windows).

RSS

Latest Activity

Alan posted photos
10 hours ago
David Buckle posted photos
Thursday
Victor Ingrassia posted a video

GH-1_SpokeElipseBloom1

experimenting with Image Operation: SKETCH MASS
Thursday
Synthetik Software replied to Synthetik Software's discussion How to emulate the old MSG Evolver ArtMapper in SA V5. in the group MSG
"Someone asked about the Source option in the Paint Brush Load control panel. The were referring to MSG brush load, but the image processing and lighting effect brush loads also have source options.  The Source refers to what is used as input…"
Wednesday
David Buckle posted a photo
Tuesday
Synthetik Software replied to ASARE CHRISTIAN's discussion REGION FILL AS BRUSH
"As far as the paint preset you are trying to use this in. So, the paint preset is using a msg preset for the msg brush load that is generative only. By that i means it’s io chain is setup so that no input to the msg preset is used in it.…"
May 19
Synthetik Software replied to ASARE CHRISTIAN's discussion REGION FILL AS BRUSH
"Source is an option in all of the Brush Load control panel types. It refers to what signal is used as the source into the associated brush load control panel processing. So for the msg brush load type, it's what source is used for input into…"
May 19
ASARE CHRISTIAN replied to ASARE CHRISTIAN's discussion REGION FILL AS BRUSH
"Hi John, Please could you explain what the source parameter under the MSG brush load option does."
May 19

© 2019   Created by Synthetik Software.   Powered by

Badges  |  Report an Issue  |  Terms of Service