HI all,

Could someone help me understand what settings I would modify to get my watershed to go vertically instead of diagonally? 


Views: 55

Reply to This

Replies to This Discussion

There are many different 'Watershed' named effects in Studio Artist, so i'm not sure which one you are asking about in this post. If you attach the preset you are using, i can take a look at it and comment further.

The Watershed ip op effects have a Propagate option, and you can use different settings available there to help control how the watershed effect propagates over the canvas.

I cannot upload anything again...I thought this issue was resolved? Can I email it? I cannot attach, I get an error and then this page. I have tried on two different browsers.

I am going to try again. 

Hopefully attachment support will pop back in a few hours.

You can email it directly to me if you can't get the attachment to work.

Hi, still not working, what is the email to send the preset to? Thank you!

Ok, so your PASeq preset really just is using one paint action step.

So when you go into the paint synthesizer, you can see that it's using path start regionization. The path start generator is the Watershed DM, and the Path type is Path Start Regionization.

So the paths generated to fill each region are defined by the Region Pattern Type in the path Shape control panel. Which is set to OutlineFill Hilbert right now. You could try some other options for the path type.

I tried using Hatch 1. Simple basic hatch pattern.

Now you will also notice that the Region Hatch Angle is set to Path Angle.

So if you go to the Path Angle control panel, you can see that you have the Path Angle set to Hue. So it's going to rotate the hatch angle based on the hue of the region. You want it to have an angle of 90 for each region if you want the hatches to be vertical, so change the Path Angle to Fixed and the Offset to 90.


Latest Activity

Paul Perlow posted photos
21 hours ago
Thor Johnson posted a video

Dancing Alien

A character I made in ZBrush, animated in Blender, then processed in Studio Artist with MSGs I made, and in the first section a movie brush.
David Buckle posted a photo
mark g replied to mark g's discussion question about alpha selections when saving sessions
"Thanks, I will do that, I just thought I would ask in case I was missing something."
David Buckle posted a photo
Synthetik Software replied to mark g's discussion question about alpha selections when saving sessions
"I'll take a look at the session code for the future. I guess for now you could make an extra layer before you save your session file, and set it to the selection. then you would have it available when you open the session file in the extra…"
mark g replied to mark g's discussion question about alpha selections when saving sessions
"I have, but my problem lies in the fact that that I can see the selection I made in my original session, but the image is no longer there outside of the selection. Which means I can't change the selection..if I do make a new selection on the…"
Synthetik Software replied to Nora Laiken's discussion Where Are Favorites Stored?
"If studio artist is loading it into the preset browser then the category folder and associated preset files are on your computer. You could try searching in the finder for individual preset file names in it? You might also want to check your file…"

© 2019   Created by Synthetik Software.   Powered by

Badges  |  Report an Issue  |  Terms of Service