HI all,

Could someone help me understand what settings I would modify to get my watershed to go vertically instead of diagonally? 

Thanks-

Views: 109

Reply to This

Replies to This Discussion

There are many different 'Watershed' named effects in Studio Artist, so i'm not sure which one you are asking about in this post. If you attach the preset you are using, i can take a look at it and comment further.

The Watershed ip op effects have a Propagate option, and you can use different settings available there to help control how the watershed effect propagates over the canvas.

I cannot upload anything again...I thought this issue was resolved? Can I email it? I cannot attach, I get an error and then this page. I have tried on two different browsers.

I am going to try again. 

Hopefully attachment support will pop back in a few hours.

You can email it directly to me if you can't get the attachment to work.

Hi, still not working, what is the email to send the preset to? Thank you!

Ok, so your PASeq preset really just is using one paint action step.

So when you go into the paint synthesizer, you can see that it's using path start regionization. The path start generator is the Watershed DM, and the Path type is Path Start Regionization.

So the paths generated to fill each region are defined by the Region Pattern Type in the path Shape control panel. Which is set to OutlineFill Hilbert right now. You could try some other options for the path type.

I tried using Hatch 1. Simple basic hatch pattern.

Now you will also notice that the Region Hatch Angle is set to Path Angle.

So if you go to the Path Angle control panel, you can see that you have the Path Angle set to Hue. So it's going to rotate the hatch angle based on the hue of the region. You want it to have an angle of 90 for each region if you want the hatches to be vertical, so change the Path Angle to Fixed and the Offset to 90.

RSS

Latest Activity

Danny Ceunen commented on Bernard Bunner's photo
Thumbnail

MSG Abstract7 / ArtCam

"nice work to lasercut in color acrylic"
15 hours ago
mark g commented on mark g's photo
Thumbnail

Leonardo's lost sketchbook. 4. Robby the robot

"actor..was in 'Titanic'...and painted a woman, which is apparenty famous....hangs in the LOUVRE..: )"
yesterday
Paul Perlow posted a photo
Tuesday
Synthetik Software replied to Adrion T. Kelley's discussion Matching colors from Source Image to .png's from Mosaic Image Folder
"If you have very specific requirements for how you want the image folder brushes to be laid own in the canvas, and if the RGB Match brush indexing doesn't do the job you want, you could build selection masks and run multiple passes with the…"
Tuesday
Synthetik Software replied to Adrion T. Kelley's discussion Matching colors from Source Image to .png's from Mosaic Image Folder
"So i'm confused about what you are trying to do.  The RGB Mapping frame modulator in Brush Source is going to choose the image that gives the least RGB error when matched to the source color where it is being placed down.  You have it…"
Monday
Synthetik Software replied to Adrion T. Kelley's discussion Matching colors from Source Image to .png's from Mosaic Image Folder
"Well, if you look in the Brush Modulation control panel, you will see that you are using the source Image Orientation to modulate both the size and the orientation of the brush nibs. So if you set the Size Modulation to None, then there will be no…"
Monday
David Buckle posted photos
Monday
Jean Detheux posted a video

Variation 19 FB image sequence from Jean Detheux on Vimeo.

Variation 19 FB image sequence

Image sequence built with individual images pulled from the Variation 18 video posted on Facebook, the images are being used based on the viewers' reaction. More info here: https://vimeo.com/showcase/5641128 At first, the 32 videos will be posted…
Monday

© 2020   Created by Synthetik Software.   Powered by

Badges  |  Report an Issue  |  Terms of Service