The above preset breaks up space beautifully. Is there a way generate the result without the numerous "lines" embedded ?

Views: 37

Replies to This Discussion

Can you attach the preset here. I'm not sure which one you are referring to. Not showing up in my search.

Here it is. Answer will be greatly appreciated! There are too many penlines inside the painted areas. I would prefer just the edge outline in pen. Uploading the file fails on your system. I have sent a message. It is Regionalizers, Pen and Water.

Here is another try at uploading. Please answer.

You mis-spelled the name i think, so that was what was throwing me when i did a search. I'm going to assume you meant "Regionizer", not 'Regionalizer".

So, try setting the pen Mode (Pen Mode control panel) to Region Fill as Brush.

Then it will try to fill the region generated by the paths as opposed to just drawing the path.

So then you will notice that the path works its way from the edges of the region to the interior. So, goto Path Shape control panel, and change the Region Pattern Type to Outline1. Now you will get the region filled with the color and the edge outline darker. if you want to change the outline coloring, goto Brush Type control panel, since it's using the anti-alias solid vector drawing brush.

RSS

Latest Activity

Alan posted photos
10 hours ago
David Buckle posted photos
Thursday
Victor Ingrassia posted a video

GH-1_SpokeElipseBloom1

experimenting with Image Operation: SKETCH MASS
Thursday
Synthetik Software replied to Synthetik Software's discussion How to emulate the old MSG Evolver ArtMapper in SA V5. in the group MSG
"Someone asked about the Source option in the Paint Brush Load control panel. The were referring to MSG brush load, but the image processing and lighting effect brush loads also have source options.  The Source refers to what is used as input…"
Wednesday
David Buckle posted a photo
Tuesday
Synthetik Software replied to ASARE CHRISTIAN's discussion REGION FILL AS BRUSH
"As far as the paint preset you are trying to use this in. So, the paint preset is using a msg preset for the msg brush load that is generative only. By that i means it’s io chain is setup so that no input to the msg preset is used in it.…"
May 19
Synthetik Software replied to ASARE CHRISTIAN's discussion REGION FILL AS BRUSH
"Source is an option in all of the Brush Load control panel types. It refers to what signal is used as the source into the associated brush load control panel processing. So for the msg brush load type, it's what source is used for input into…"
May 19
ASARE CHRISTIAN replied to ASARE CHRISTIAN's discussion REGION FILL AS BRUSH
"Hi John, Please could you explain what the source parameter under the MSG brush load option does."
May 19

© 2019   Created by Synthetik Software.   Powered by

Badges  |  Report an Issue  |  Terms of Service