The above preset breaks up space beautifully. Is there a way generate the result without the numerous "lines" embedded ?

Views: 53

Replies to This Discussion

Can you attach the preset here. I'm not sure which one you are referring to. Not showing up in my search.

Here it is. Answer will be greatly appreciated! There are too many penlines inside the painted areas. I would prefer just the edge outline in pen. Uploading the file fails on your system. I have sent a message. It is Regionalizers, Pen and Water.

Here is another try at uploading. Please answer.

You mis-spelled the name i think, so that was what was throwing me when i did a search. I'm going to assume you meant "Regionizer", not 'Regionalizer".

So, try setting the pen Mode (Pen Mode control panel) to Region Fill as Brush.

Then it will try to fill the region generated by the paths as opposed to just drawing the path.

So then you will notice that the path works its way from the edges of the region to the interior. So, goto Path Shape control panel, and change the Region Pattern Type to Outline1. Now you will get the region filled with the color and the edge outline darker. if you want to change the outline coloring, goto Brush Type control panel, since it's using the anti-alias solid vector drawing brush.

RSS

Latest Activity

Synthetik Software replied to mark g's discussion Kai's supergoo..
"Do you want a paint preset? Or do you want to use interactive warp? There are some options in there that use an adjustable local sphere radius for the interactive warp effect."
16 hours ago
Yao Kuame replied to Yao Kuame's discussion Paint preset mixer
"Really helpful, please asked about an explanation on how to use the paint preset mixer, could you help me out."
16 hours ago
mark g posted a discussion

Kai's supergoo..

John, a long time ago, years in fact, I asked if there was a preset that imitated the old 90s program 'Kai's supergoo". You put a really cool preset up which did just that, I've trawled my laptop and backup and cannot find it...any chance you or anyone could put it up again?thanksSee More
19 hours ago
Thor Johnson posted photos
yesterday
Synthetik Software replied to Yao Kuame's discussion Paint preset mixer
"You need to have an ip op that generates vector paths selected as your current ip op for that generate path menu command to be active.  So, if it is active, then the current ip op you have selected generates vectors. If it isn't active,…"
yesterday
Yao Kuame replied to Yao Kuame's discussion Color vectors
"Thanks really appreciate it"
yesterday
Yao Kuame posted a discussion

Paint preset mixer

Hello, Please the generate from IP op option under the generate path menu command is disabled. How can I fix this please.Again please could someone explain how to use the paint preset mixerSee More
yesterday
Synthetik Software replied to Heather's discussion Watershed direction
"There are many different 'Watershed' named effects in Studio Artist, so i'm not sure which one you are asking about in this post. If you attach the preset you are using, i can take a look at it and comment further. The Watershed ip…"
yesterday

© 2019   Created by Synthetik Software.   Powered by

Badges  |  Report an Issue  |  Terms of Service