As I understand it correctly you can only run batch processing with PASeq. I have now several MSG presets which I would like to test on a bigger scale with a set of picture. How to make now presets into PASeq? 

Views: 221

Reply to This

Replies to This Discussion

You can just record the MSG preset (or presets if it's a multiple step effect process) into a PASeq (paint action sequence).

So bring up the PASeq palette.

Hit the erase button at the top of the PASeq palette.

Turn on the Rec checkbox at the top of the PASeq palette.

Run the MSg preset.

Turn off the Rec checkbox.

If you want to export your new PASeq preset you can just use the appropriate File : Export menu.

Here's a tip on working with PASeq.

yes, that works. thanks John, even on a Sunday !

Hi John

Happy New Year to you and all the folks at SA and the Community of users !

I'm a newbie and just trying to get my head around running a series of presets - some of which are MSG, others Vector on a folder of STILL Images only.  Am I able to run Action/Batch Process/with Paint Action Sequence, on all categories of presets ?

And within the action I was hoping there might be a way to control the "length of time" certain sub-steps "play" so that I might be able to emphasize certain characteristics of the still images.

If anyone has any suggestions I'd very much appreciate a heads up.

Much appreciated.

FG

Any of the action menu commands like processing movies or batch processing only work with paint action sequences (PASeq). So you would need to take whatever presets you are interested in, and make a PASeq using them, and then run batch processing with that.

As far as 'length of time', there's no direct concept of that in Studio Artist for processing action steps. Normally, it's a function of how long the action step takes to process. You could try editing action steps to make them run faster or slower, but that's going to change the effect in most cases.

Paint action steps are a little different, in that you can adjust the number of paint strokes associated with the action step. To do that, you adjust the Max Stroke option in the Path Start control panel.

There's also a way to slow down each paint stroke, if that is what you are looking for. To do that, you can use the Throttle Speed option in the Miscellaneous control panel. There are specific timing settings there you can use to delay each paint stroke by the specified timing amount.

hi John:

Thanks very much for getting back to me. I apologize for my "newbieness" - I will have to familiarize myself with these features.

re: "Any of the action menu commands like processing movies or batch processing only work with paint action sequences (PASeq). So you would need to take whatever presets you are interested in, and make a PASeq using them, and then run batch processing with that."

Is this process explained in detail in the User Manual you could direct me to ?

:)

Thanks !

It's pretty straightforward. Just turn on recording in the PASeq window (the rec checkbox). Then run whatever preset you want using the main Action button. Whatever action you are running is recorded as an action step in the PASeq. Turn off PASeq recording. You now have recorded PASeq that uses that action step. You can now run batch processing with it.

Any of the tutorial movies on the main synthetik site that discuss how to process a movie file run through how to record a PASeq. This tip is also a good introduction to recording a PASeq.

An alternative way to do what you want is to use Gallery Show. Put the presets you are interested in using into a custom favorites folder. Then run gallery show using the current favorites technique, and make sure your custom favorites folder is the current favorites. 

This is way more advanced than the normal use a PSeq to do it, but thought i'd mention it.

Here's some tips on gallery show.

Here's a tip on custom favorites folders.

Thanks John - will do some digging

I wonder if you might have any insights as to the most common reasons for the program to crash

I notice it's quite the CPU hog

LOL

I will investigate from this end this afternoon.

thank you !

Attachments:

You should file a crash report on our helpdesk . Please attach the mac crash log, since that can tell us what the problem was, and is the best way to resolve the problem.

Other than issues associated are running out of memory from working with very large canvas sizes, i'm not aware of any crash issues. I can run studio artist all day doing all kinds of things continuously with no crashes.

RSS

Latest Activity

Synthetik Software commented on Synthetik Software's video
Thumbnail

GenerativePaintTransitions1B

"Here are some more examples of artwork automatically created using generative paint strategies in Studio Artist V5.5 gallery show. I'm also playing around with some of the settings in the new Transition Context effects to create the transitions…"
1 hour ago
Synthetik Software posted a video

GenerativePaintTransitions1B

Everything in this video was created automatically by Studio Artist 5.5 using AI Generative Paint Strategies. The transitions between images were generated u...
1 hour ago
Synthetik Software commented on David Buckle's photo
Thumbnail

Stairs

"Cool one."
6 hours ago
David Buckle posted a photo
6 hours ago
Synthetik Software posted photos
7 hours ago
Paul Perlow posted a photo
7 hours ago
Sam posted a discussion

SA, If you add one option we can generate coloring book too.

Dear Synthetik Software, we have many options for filling, please add a new option:Put Color Number in regionWe can create perfect coloring book that there are not anywhere.please see this website as example for my meaning.See More
yesterday
Synthetik Software replied to Paul Raats's discussion Large prints done by anyone
"Adding several images.  Yes, there are various approaches to this. You can of course manually swap in different source images as you work. You can use the Recent Source Images menu options to get back to ones you recently used, if you want to…"
Sunday

© 2021   Created by Synthetik Software.   Powered by

Badges  |  Report an Issue  |  Terms of Service