Art Processing Sharing Blog
My attempt at an egg tempera paint look generated in Studio Artist V5.5. Seems to work well for both still images as well as video processing. Like all good ideas, i was trying to do something else when i stumbled upon it yesterday. So i went with the flow rather than being pissed off that my original idea was not quite panning out as i had hoped.
I built this with 2 different layers, but there is no stacked layer compositing involved. I have a recursive processing loop going on in each layer. It's a very small amount of recursive mixing of the previous output of the layer with the current output of the layer. Enough to subtly blend, but not so much that you see ghosting.
I used the Sketch Mass IpOp in the first layer to build the sketch hatching. Along with the Threshold IpOp to punch through a little bit of the low end of the mass rendition.
I used the output of the first layer for the luminance of the Colorize IpOp effect, colorized by the source. This is happening in the second layer. Smart Blu IpOp is used in both layers. Several passes of MultiOctave Gradient Lighting IpOp with different settings is used in the second layer, along with some low Mix Smart Contrast, to build the shading.
You need to be a member of Studio Artist to add comments!
Hi, here is a new video, lots of MSG (background layer) and MSG generation path starts along with Time Particles in the paint synth, the "Piggy" figure I made in ZBrush and then animated in Blender, with embedded alpha channel, then took into Studio Artist and made into several different kinds of Movie Brushes. Several layers composited together in Blender. Music made with Bespoke Synth and my Shenai. If anyone has any questions about how it was done I'd be happy to explain more.…
I am not sure if this forum is active anymore... I thought it would be fun to post a very early piece of mine made with, probably, SA3 or 4. I have been a user since 2001.
"Chromosome Rain", 2010
Another experiment painting with Paint Synth vector based presets. Captured rather than output to file.
Either the night sky before the Day of the Triffids - or a closup of Star Treks The…
A capture of a PasEq playback (all I had left after a crash) I didn't save the over sized Paint Synth Presets that I was adjusting and testing... But I did save the PAsEq. This would be what…
Working with Source .png Images Turning the alpha channel on for transparent .png backgrounds When using .png source images with transparent backgrounds, you will need to set Canvas > Selection > Set to > Source Alpha and then Check Mask…
Basics of the Dual Paint Mode, Concepts and How to Create Your Own Dual Paint Presets For More Information on Dual Paint please see this DUAL PAINT POST For More Information DUAL PAINT POST
The post…
How to Erase the Canvas To erase the canvas choose the Eraser Icon at the top of the Interface or choose Canvas > Erase to See this Post for more detailed information on the canvas eraser options.
The post…
Everything You Need to Know about Studio Artist Presets and Preset Management
The post Preset Management Video appeared first on Studio Artist…
Resizing the Canvas Please see this tip on Resizing the Canvas And how to Resize the Canvas for High-Resolution Print
The post Resizing the Canvas appeared first on…
Comments