All forums

Replies

  • liveart January 24, 2014 at 8:00am

    Try playing with BW soft threshold adjust then the invert ImOp. Alternatively, you might try Using the fixed image ImOp seting the color space YIQ then the composite to edge3 and the composite space to Lum. After this you will want to either do a bias gain adjust or run one of a variety of ImOps that will brighten the contrast and smooth the image

  • liveart January 24, 2014 at 8:07am

    here is a PASeq that will do a fair job of simulating a depth mask. I am reasonably certain that there is a more direct way via the MSG. John might be able to help with that.

    depthmapsimulated.zip

  • liveart January 24, 2014 at 8:19am

    depending on how noisy your source is this one might work better. The last step is turned off- this step is an invert step, might be needed for some source images.

    depthmapsim2.zip

    • liveart > liveart January 24, 2014 at 8:23am

      2472664158?profile=RESIZE_1024x10242472664303?profile=RESIZE_1024x1024version 2 works on this image because it is not very noisy.    Art is not mine used only for example all rights reserved to the original artist.

      • GoldFlux > liveart January 24, 2014 at 9:03am

        These are perfect. Thank you so much for your help. Would never have figured out how to do this on my own.

This reply was deleted.

This forum closing - my attempt to keep things going

Hi Guys,So I have setup a forum here:http://www.sawberry.com/bbs/It links to the archive stuff. Plus allows posting on the threads which mirror the threads here.In a few days this forum will close so this is my attempt to keep things archived and also allow the community to continue.The way it is setup makes it difficult to search but i'm working on that in the meantime. The basic is to preserve the knowledge from this site and search will come later just i have a day job also so I can only get…

Read more…
Started by Sejnicku
4 Replies · Reply by Sejnicku 1 hour ago