HI all,
Could someone help me understand what settings I would modify to get my watershed to go vertically instead of diagonally?
Thanks-
You need to be a member of Studio Artist to add comments!
This reply was deleted.
This forum closing - my attempt to keep things going
Hi Guys,So I have setup a forum here:http://www.sawberry.com/bbs/It links to the archive stuff. Plus allows posting on the threads which mirror the threads here.In a few days this forum will close so this is my attempt to keep things archived and also allow the community to continue.The way it is setup makes it difficult to search but i'm working on that in the meantime. The basic is to preserve the knowledge from this site and search will come later just i have a day job also so I can only get…
Read more…Time Particles
It's not all Time Particles, but there are some, I just love the term "Time Particles"https://www.youtube.com/watch?v=U742mm20JTw&ab_channel=Thorrific
Read more…Mac OS 14 compatability question
Apple has released some new software that will require my upgrading to their latest OS.I'm worried that by doing so I will break SA 5.5Does anyone here use SA successfully with Sonoma 14.5?Any info is greatly appreciated.
Read more…MSG Advanced Editor question
is it possible to change/control what pallets appear in the Grad Tab?
Read more…
Replies
There are many different 'Watershed' named effects in Studio Artist, so i'm not sure which one you are asking about in this post. If you attach the preset you are using, i can take a look at it and comment further.
The Watershed ip op effects have a Propagate option, and you can use different settings available there to help control how the watershed effect propagates over the canvas.
I cannot upload anything again...I thought this issue was resolved? Can I email it? I cannot attach, I get an error and then this page. I have tried on two different browsers.
I am going to try again.
Hopefully attachment support will pop back in a few hours.
You can email it directly to me if you can't get the attachment to work.
Hi, still not working, what is the email to send the preset to? Thank you!
Ok, so your PASeq preset really just is using one paint action step.
So when you go into the paint synthesizer, you can see that it's using path start regionization. The path start generator is the Watershed DM, and the Path type is Path Start Regionization.
So the paths generated to fill each region are defined by the Region Pattern Type in the path Shape control panel. Which is set to OutlineFill Hilbert right now. You could try some other options for the path type.
I tried using Hatch 1. Simple basic hatch pattern.
Now you will also notice that the Region Hatch Angle is set to Path Angle.
So if you go to the Path Angle control panel, you can see that you have the Path Angle set to Hue. So it's going to rotate the hatch angle based on the hue of the region. You want it to have an angle of 90 for each region if you want the hatches to be vertical, so change the Path Angle to Fixed and the Offset to 90.