Simon Woods
  • Sheffield Yorkshire
  • United Kingdom
Share on Facebook Share

Simon Woods's Friends

  • Jean Detheux

Simon Woods's Groups

Simon Woods's Discussions

A question about Quicktime
17 Replies

Hi all, I know this isn't a quicktime forum, but anyhow, I have created an animation (using SA of course) from an image sequence, opened it in QT 7 pro, saved it out and it is 2.43GB, it stutters and…Continue

Started this discussion. Last reply by Jean Detheux Mar 24.

Can Machines Create Art?
2 Replies

I found this article over the weekend and just finished reading it. I wonder if some here might find it useful, he certainly references lots of other articles on the subject.Half way through I found…Continue

Started this discussion. Last reply by Simon Woods Oct 12, 2016.

MSG strangness
8 Replies

Hi John and all, Why is it I often see one thing in the preview for MSG and another in the main canvas render? Is it my settings, or is it just the way it is? Continue

Started this discussion. Last reply by Simon Woods Mar 15, 2015.

painting a 3d animation
2 Replies

Here's an incredibly complex and strange thing I was working on a while ago that may be of interest to someone - here's how it went, I created a woodland scene (in 3d software) with a character…Continue

Started this discussion. Last reply by Simon Woods Mar 4, 2013.

Gifts Received

Gift

Simon Woods has not received any gifts yet

Give a Gift

 

Simon Woods's Page

Latest Activity

Jean Detheux replied to Simon Woods's discussion A question about Quicktime
"Victor, My first major in Art school was “Mural and Decorative Painting”, and there I learned how to deal with very large paintings/murals/frescoes. It was fascinating, and at times frustrating, to see how a small sketch blown up on a…"
Mar 24
Victor Ingrassia replied to Simon Woods's discussion A question about Quicktime
"Thanks Jean for your info about mega-sized projection. Much appreciated. ~Victor"
Mar 24
Jean Detheux replied to Simon Woods's discussion A question about Quicktime
"Thankfully, Rousseau did not finish Cézanne’s paintings, it probably would have been as “convincing” as this “restauration”! For the record, I am one of those who never really “finish” a piece, we…"
Mar 24
Simon Woods replied to Simon Woods's discussion A question about Quicktime
"Thanks Jean, all very interesting, I shall probably want to get FCPX at some point. I just popped on to share this page on Rousseau which has a quote from him about Cezanne which I'm sure you will find…"
Mar 24
Jean Detheux replied to Simon Woods's discussion A question about Quicktime
"As I must have said earlier, I had the opportunity to test one of my movies twice in a movie theatre, once in ProRes 422 (HQ) and the other in ProRes 4444. At that huge size, any flaw and differences are/can be very noticeable. It was obvious that…"
Mar 19
Simon Woods replied to Simon Woods's discussion A question about Quicktime
"Very interesting - I found 4444 because QT10 was using it, I do use alpha channels quite a bit for compositing 3D software output, also file size is becoming an issue as my 1TB is getting full now!"
Mar 18
Victor Ingrassia replied to Simon Woods's discussion A question about Quicktime
"I love Apple ProRes codecs too. I used to religiously use Animation Codec... mostly because it looked so good and cause I liked the name. But as soon as my fps rates got higher and resolutions got larger than 720x480, things began to bog down. Once…"
Mar 15
Simon Woods replied to Simon Woods's discussion A question about Quicktime
"Yes, the new codecs even appear in SA, so I made it default since it works so well "
Mar 12
Jean Detheux replied to Simon Woods's discussion A question about Quicktime
"Very good. Glad to see it worked (I have the Pro applications so I did not have to try this make-shift installation, I was not sure it would work for you)."
Mar 8
Simon Woods replied to Simon Woods's discussion A question about Quicktime
"Ha, it works! I now have 4444 in QT7! Excellent :) "
Mar 8
Jean Detheux replied to Simon Woods's discussion A question about Quicktime
"Go for it Simon, ProRes 4444 rocks as a work format. Good luck."
Mar 7
Simon Woods replied to Simon Woods's discussion A question about Quicktime
"Thanks Jean, that could turn out very useful :D "
Mar 7
Jean Detheux replied to Simon Woods's discussion A question about Quicktime
"Oh ye of little hope: http://www.youtube.com/watch?v=tlpwuGTc1tk ;-)"
Mar 4
Simon Woods replied to Simon Woods's discussion A question about Quicktime
"Oh, I don't have those - I was hoping to say I do now, but have just downloaded, and it says I can't install as I don't have FCP, Motion, or compressor! I got 4444 with QT X, so I guess I'll survive, but it does seem a bit…"
Mar 4
Jean Detheux replied to Simon Woods's discussion A question about Quicktime
"I assume you have the “Pro” codecs installed (you must you did see ProRes 4444 earlier), so the ProRes options should be available. In SA, first open the movie settings this way: Going deeper, you should see this: Once you’ve…"
Mar 3
Simon Woods replied to Simon Woods's discussion A question about Quicktime
"Yes I used Animation for my QT7 movie, usually I'll output an image stream then open & save in QT7, its a pity they didn't put the capability of QT7 in 10.  Its so strange that Apple are ditching QT, I wonder what they are…"
Mar 3

Profile Information

What version of Studio Artist do you own?
4
How do you use Studio Artist?
Drawing and morphs, animation
About Me:
UK artist

Simon Woods's Photos

  • Add Photos
  • View All

Simon Woods's Videos

  • Add Videos
  • View All

Comment Wall

  • No comments yet!

You need to be a member of STUDIO ARTIST USER FORUM to add comments!

Join STUDIO ARTIST USER FORUM

 
 
 

Latest Activity

John Dilworth replied to John Dilworth's discussion A.I. Gigapixel--an Innovative Upscaling Program
"Thanks Bernard.  As long as Giga has good results, speed is unimportant to me--I'll mainly use it in batch mode while doing other things.  Also, Giga can do 1500% in two passes--first 600%, and second 250%, so there's no upper…"
18 hours ago
Bernard Bunner replied to John Dilworth's discussion A.I. Gigapixel--an Innovative Upscaling Program
"Hi John, thanks for posting this info. I downloaded trial Mac version. I made different tests. When I take a detail of a portrait picture, exemple eyes, so yes, AI giga brings a good result, better than Artis Software Super Resize that I'm…"
21 hours ago
David Buckle posted photos
yesterday
Gad Eko Hendro H replied to John Dilworth's discussion A.I. Gigapixel--an Innovative Upscaling Program
"Thanks John.This tool is very usefull. "
Monday
John Dilworth replied to John Dilworth's discussion A.I. Gigapixel--an Innovative Upscaling Program
"But even if you could convert to vector, you wouldn't see the improvements that Gigapixel can produce.  Eg a distant cell tower or reflector dish may be just a blur in your image, but it can intelligently produce a larger image that looks…"
Monday
David Buckle posted photos
Sunday
Gad Eko Hendro H replied to John Dilworth's discussion A.I. Gigapixel--an Innovative Upscaling Program
"is it possible to convert to vector? As we know, vector are better than raster when we talk about size we need"
Sunday
John Dilworth added a discussion to the group Studio Artist Social Media Group
Thumbnail

Facebook posts etc

To kick things off with this new Group, here’s a brief personal report.  I have two Facebook pages at   https://www.facebook.com/john.dilworth.102  and    https://www.facebook.com/pg/jbdilworth/photos/?tab=albumsAlmost all of the posts and albums are derived from SA-produced images.Eg here’s an SA picture I just posted:…See More
Sunday

© 2018   Created by Synthetik Software.   Powered by

Badges  |  Report an Issue  |  Terms of Service